1. So it is a good choice for seeker conformal array using elements fed by coplanar waveguide.
因此，将共面波导馈电的天线单元应用于导引头共形阵列天线中是一个很好的选择。
来自互联网
2. The design method of self-biased circulator with coplanarwaveguide structure was also studied.
最后，研究了共面波导自偏置环行器的设计方法。
来自互联网
3. The track from the filter to the antenna has been designed as a coplanarwaveguide with ground.
滤波器到天线的线被设计为和地的共面波导。
来自互联网
4. The transition effect of the via-free transition from coplanarwaveguide (CPW) to microstrip is analyzed.
分析了无通孔接地板对共面波导(CPW)至微带转换过渡的影响。
来自互联网
5. The switch consists of two suspended metallic membranes supported by a serpentine flexible spring over a coplanar waveguide.
该开关的结构特点是，以共面波导上的悬空金属膜为双桥结构，并且膜桥的支撑呈折叠弹簧结构。
来自互联网
6. The coplanarwaveguide on the substrate with finite dimensions is a physical model which is very closed to the engineering situation.
有限尺寸介质基片上的共面波导是一种非常接近于工程应用状态的物理模型。
来自互联网
7. To obtain the balanced feed for the dipole antenna driven by a coaxial transmission line, a coplanarwaveguide fed structure is used.
为获得在同轴馈电时天线振子的平衡馈电，该设计使用了共面波导馈电结构。
来自互联网
8. In Chapter Three, the basic theory of power divider is introduced firstly. Then the present situation of coplanarwaveguide power dividers is introduced briefly.
在第三章中，首先介绍了功率分配器的基本原理，然后对共面波导功率分配器的研究现状进行了简要介绍。
来自互联网
9. The temperature distribution on the coplanarwaveguide(CPW)and the terminal resistors was simulated, and so did the impact of approach of the thermopile on the CPW.
模拟结果包括共面波导（CPW）与终端电阻上的温度分布，以及热电堆的接近对CPW性能的影响。
来自互联网
10. This paper presents a novel unequal cross-slot coupled circularly polarized microstrip antenna excited by coplanarwaveguide (CPW), which is convenient to be integrated with active circuits.
提出一种新型的圆极化微带天线形式，采用共面波导、不等长十字槽耦合馈电，易于与有源电路集成。
来自互联网
11. Computer aided design oriented analytical formulas were presented for determining the characteristic parameters of multilayered cylindrical coplanarwaveguide (MCCPW) with asymmetrical slot widths.
提出了确定非对称槽宽多层圆柱共面波导(MCCPW)特性的便于计算机辅助设计的解析公式。
来自互联网
12. The transitions of SIW with microstrip are solved by using concave transition and grounded coplanarwaveguide transition, which are convenient for filters synthesized with active microwave circuits.
13. The bandwidth of the DRA is increased by using coplanar-waveguide inductive slot, and the size of the DRA is reduced by loading a L metallic strip on the DR.
14. The bandwidth of the DRA is increased by using coplanar-waveguide inductive slot, and the size of the DRA is reduced by loading a L metallic strip on the DR.
