1. The loading capacity is an important index of the aerostatic guide way.
承载能力是静压气浮导轨的一个重要的静态性能指标。
来自互联网
2. The orifice shape and aperture size is one vibration source on aerostatic bearing.
在空气静压导轨中，节流孔形状和孔径大小是主要振源之一。
来自互联网
3. This paper introduces a design process of a testing stand for aerostatic journal bearings.
详细地介绍了空气静压径向轴承试验台的设计过程。
来自互联网
4. A novel structure of motorized spindle with aerostatic bearings for micro drilling is analyzed.
针对这些要求，提出了将空气静压轴承应用于超高速微钻削电主轴支承结构中。
来自互联网
5. The aerostatic guide way is a sort of thrust bearing, and is applied to linear air guide way widely.
空气静压导轨是空气静压止推轴承的一种，在直线气浮导轨中被广泛采用。
来自互联网
6. Numerical identification of aerostatic force is conducted for Sutong Bridge section in CFD modeling.
对以苏通桥断面为例的桥梁闭口箱梁模型进行了三分力系数CFD数值识别。
来自互联网
7. This method increases the measuring accuracy and efficiency greatly about the aerostatic bearing rigidity.
该方法大大地提高了气体静压轴承刚度的测试精度与测试效率。
来自互联网
8. Conventional aerostatic bearings have the problems of vibrations and motion inaccuracy due to the low stiffness.
传统的静压气体径向轴承由于低刚度而存在着振动和运动精度不高的问题。
来自互联网
9. The inherent throttle bearing parameters are optimized according to the maximum stiffness of aerostatic bearing.
按气体轴承刚度最大准则优化了固有节流轴承参数。
来自互联网
10. The closed aerostatic positioning stage driven by linear motor is a kind of typical precision machinery structure.
基于静压气浮支撑和直线电机驱动的气浮定位工作台是一种典型的精密机械结构。
来自互联网
11. The cause of instabilities in aerostatic bearing systems operated in a vacuum environment is studied in this paper.
本文确切地指出了在真空中静压气浮轴承系统出现不稳定的原因。
来自互联网
12. The properties of aerostatic bearing were solved, and some optimum parameters of configuration and gas were obtained.
讨论轴承结构及供气参数对其静态性能的影响，并进行参数优选和设计。
来自互联网
13. A scheme for autonomous control of aerostatic bearing used in large-sized photoelectric precision instrument is proposed.
提出一种用于大型光电精密仪器的自主控制静压气体轴承方案。
来自互联网
14. Through me, the aerostatic art would render immense services to the world, if God should spare my life! But that cannot be.
如果上帝赐予我足够长的生命，我肯定能在航空学领域里作出巨大贡献，但这不会成为现实。
来自互联网
15. In this paper, the boundary element method (BEM) was applied to study static characteristics of aerostatic cylindric bearing.
本文应用边界元方法研究了在二维流动假设下，气体静压圆柱轴承的静态特性。
来自互联网
16. The conclusions of this paper gave some certain practical significance to the design and manufacture of aerostatic cylindricalbearings.
本文的结论对气体静压轴承的设计与制造。具有一定的实际意义。
来自互联网
17. This article conducts the structure and the design of granite aerostatic main axle to analysis and research, and to discuss the making method of granite.
本文针对花岗岩空气静压主轴的结构和设计进行分析研究，并对花岗岩的一般加工方法进行了探讨。
来自互联网
18. The aerodynamic interference effects on aerostatic coefficients of twin deck Bridges with large span were investigated in details by means of wind tunnel test.
19. Porous material can supply millions of micro-hole regarded as countless throttle, therefore porous aerostatic bearings have high load capacity and static stiffness.
20. Based on the theoretical analysis, a set of aerostatic bearing for experiment is designed and manufactured, of which the static and dynamic characteristics is tested.
21. Aimed at aerostatic guideway, a two dimensional distribution of air pressure and effect factor on the friction force were analyzed under high speed working conditions.
以静压气浮导轨为研究对象，对导轨气浮块底部气体压力的二维分布规律及影响摩擦力的因素进行了理论分析。
来自互联网
22. Since uncertain conditions of bridge structure and the wind circumstance should be accounted for, occurrence of flutter and aerostatic instability is therefor uncertain.
由于桥梁本身及其所处风环境的不确定性，桥梁颤振与气静力失稳的发生也是不确定的。
来自互联网
23. Compared with conventional orifice restriction aerostatic bearings, aerostatic porous bearings have some advantages for example high load capacity, high damp, wider stability, etc.
与传统的小孔节流气体静压轴承相比，气体静压多孔质轴承具有高承载能力、高阻尼和很好的稳定性等。
来自互联网
24. For orifice compensated aerostatic bearings, entrance effect leads differences between actual pressure distributions and traditional laminar flow assumption in gas film of the bearings.
小孔节流空气静压轴承中，由于进口效应现象的存在导致轴承气膜内实际压力分布不再符合传统的层流假设。
来自互联网
25. The results of analysis prove that the vibration damping and stabilized guidance of saw-blade can be realized by using the aerostatic guide, which can improve stability of band saw-blade.
26. Aerostatic slideways can make the worktable hanging by the aid of the definite stressed air, which don't come in contact with the slideways surface so that there isn't nearly friction working.
27. As the precision and ultra-precision technologies are developing in leaps and bounds, continuous improvements are also required in the stiffness, accuracy and stability of aerostatic bearings.
随着精密、超精密技术的飞速发展，对气体静压轴承的刚度、精度及稳定性的要求也不断地提高。
来自互联网
28. As the precision and ultra-precision technologies are developing in leaps and bounds, continuous improvements are also required in the stiffness, accuracy and stability of aerostatic bearings.
